Auto news on Youtube Feb 17 2019

- I made this stool for when I'm sitting at my work bench

but then when I flip it over,

it turns in to a small stepladder.

Hey everybody, this is Justin from Remodelaholic,

welcome back to the channel.

I need a stool in my shop and I need a stepladder.

So, I was gonna combine the two in to a stepladder/stool,

just like you see right here in my little

sketch-up model that I created.

It's gonna be 24 inches tall,

it's gonna be about 17 and a half inches wide,

kind of wider on top,

but I just wanted a nice, wide base,

so when I flip it over it supports me.

It's simple design that I'm gonna use

with two by fours and two by twos.

So, I decided to see how much scrap wood I could find

around the shop to build this bench

without having to go to the store.

So, I'm gonna start by cutting my seat boards,

five of 'em, at 17 and a half inches.

(saw buzzes)

Next, I'm going to cut five boards at 13 and a half inches.

These will be the boards for the steps.

Set that up there.

Put my stop over here so I can cut 'em real fast.

(saw buzzes)

Now, I'm gonna cut out the legs at 22 and a half inches.

We have another video right here on our channel

that is pretty popular,

it's a Benjamin Franklin chair,

so it's got a little bit more advanced build to it,

but it flips over and you can step right up

and you reach high things.

I took the inspiration of that video

and I wanted to create something where you just

flip over the stool and

you don't have to have any additional hardware,

it's just two by fours, two by twos and some screws.

(saw buzzes)

I ran out of two by twos, so I'm just gonna rip this down

on the table saw

and make a two by two out of it.

I'll get four pieces.

(saw buzzes)

So, now with these last three two by twos,

I'm gonna cut six pieces out of them

at 13 and a half inches long.

(saw buzzes)

And these'll be the last six pieces that I need

for the sides.

(saw buzzing)

So here I have the seat,

the board for the steps,

the boards for the side rails,

and the legs.

I'm gonna build these steps first,

and then I'll assemble the seat with these two little

braces here,

and then I'll assemble all the legs.

Be sure to subscribe and ring the notification bell

so you don't miss any videos.

We have videos coming every week.

Give this video a thumbs up if you find it helpful.

(bouncy music)

So grab these two and half inch construction screws

that I'm gonna use, this one has the kind of star bit to it.

(drilling)

This is what I use the most around the shop,

so I'm just gonna use that.

I'm just gonna drill it together with screws,

it shouldn't take too long to make.

It's something that's gonna be in the shop,

and it doesn't have to look beautiful,

I just want it to function really well.

If you do want to see a nicer version of this that you

can put inside your kitchen, under a bar,

let us know in the comments below,

and if we get enough people that wanna see another version,

we'll put that video together.

(bouncy music)

(drilling)

'Kay, so there's the first step,

and the second step.

The seat is going to have a half an inch offset from the

sides,

and then I'm setting it one and three quarters of an inch

from the edge, and then I'll screw that in place.

(bouncy music)

(drilling)

So, this is the bottom of the leg here,

I'm gonna mark up four inches,

this'll be a step,

and then from this four inches,

I actually need to go 10 inches to the next step

which is 14.

So not that one, but here and here.

(clattering)

then this will be up against the seat.

Got the legs on the table,

I've got the steps right here.

The small one, the large one,

and then right here will be the seat.

So I set up a fence on the table so that when I'm

drilling, it'll be easier just to drill in this way,

and have something to push up against.

I'm using my impact driver to be able to drive this

really long screw in so it'll hold real tight.

(drilling)

(bouncy music)

Alright, so here's the stool,

the design that I modeled and sketch up,

and I realized there's a problem with it.

'Cuz I went to sit on it and the sides were starting to

buckle.

So you can see,

there's not enough support to keep this from

swaying back and forth.

So what I'm gonna do to fix that is just put a two by four

right here, in this area.

So that should be enough to keep the stool from

wanting to buckle.

So, if I could add thirteen and a half inch two by four,

screw it in in four spots,

two on each side, I think that'll keep it from moving.

(drilling)

So, looks like that added piece,

that's what it needed to give it some more support

so it didn't get out of square.

So it fits really nice underneath the bench there,

just take it out when I need it.

Now I can get to the top shelf.

Took me only a couple of hours to build,

I didn't have to buy anything because I had all this lumber

in my shop just waiting for a project.

So, here it is.

Make sure you check out this video here,

about how I'm organizing the shop.

Thanks for watching and we'll see you in the next video.

For more infomation >> How To Build A Bar Stool Step Ladder - Duration: 9:31.

-------------------------------------------

Building a DC power monitor (part 3) - Duration: 33:55.

For more infomation >> Building a DC power monitor (part 3) - Duration: 33:55.

-------------------------------------------

Ashton Kutcher | Build a Life, Don't Live One - Duration: 3:25.

fraud my name is actually not even Aston Ashton is my middle name

my first name's Chris and and it always has been it got changed when I was like

19 and I became an actor but there was some really amazing things that I

learned when I was Chris and I wanted to share those things with you guys because

I think it's helped me be here today so it's really three things the first thing

is about opportunity the second thing is about being sexy and the third thing is

about living life so first opportunity I believe that opportunity looks a lot

like hard work when I was 13 I had my first job when my dad caring shingles up

for the roof and then I got a job washing dishes at a restaurant and then

I got a job in a grocery store deli and then I got a job in a factory sweeping

cheerio dust off the ground and I've never had a job in my life that I was

better than I was always just lucky to have a job and every job I had was a

stepping stone to my next job and I never quit my job until I had my next

job and so opportunities look a lot like work

number two being sexy

the sexiest thing in the entire world is being really smart and being thoughtful

and being generous everything else is crap I promise you it's just trap that

people try to sell to you to make you feel like less so don't buy it

be smart be thoughtful and be generous the third thing is something that I just

relearning this movie about Steve Jobs

and Steve Jobs said when you grow up you tend to get told that the world is the

way that it is and that your life is to live your life inside the world and try

not to get in too much trouble and maybe you get an education and get a job and

make some money and have a family but life can be a lot broader than that when

you realize one simple thing and that is that everything around us that we call

life was made up by people that are no smarter than you and you can build your

own things you can build your own life that other people can live in so build a

life don't live one build one find your opportunities and always be sexy I love

you guys you