Auto news on Youtube Jun 24 2018

Hello friends from youtube here I am in the process of making another

patio door, this one I'm going to share because it's a different design

to those that I have done previously.

here I already have all the frame cut I'm going to dot it right now

and I'll show you how it's going to build our door.

it has an arch on the top

and I'm using 1 1/2 "x 3" tubular

here I weld the whole door, as you can see there is the frame all

polished, also here are the parts that I was cutting with plasma.

here I form a moon, next is to install

this tubular 3/4 " from the inside in this box

and around here also all around,

Here I already have our tubular all around

this is the sheet that I'm going to use,

it is perforated all around

I'm going to unite it as a kind of rivets

I'm going to give you welding points in each hole instead of putting them in the

shores, I like this more

the auction style that the points of welding around.

and here we have our plate attached to our door.

this is how our rivet is this is the front of our

door where we install the sheet.

here I put an ornament, they are three, they are cover posts

4 "x 4" the three of them form diamond-shaped

Here is our part of above our finished door already

I installed a tubular 3/4 " all around the frame, install this

Coyote figure.

that's how look at the part of above.

and the only thing that will be missing here is going to be prepare our post

to join them to our door

this time I'm going to use you covers that have a different design

I do not want anything more square with the stopper,

I'm going to put them like that so that it looks more elegant, in a

comment they told me why I used the screw hinge instead

to use the common hinge that I know as a book hinge,

This hinge is more resistant than the booklet, that's one point and the other

is that no structure is good leveled and what this allows us

hinge is to adjust our door easier,

up to this point we already install the hinges

and the parts to hold our post to the wall,

on this side I already have this post ready

here I have the handle too

here I already have the background presented, I wanted to show them before welding

I made holes

I do not know if you can appreciate them

It made holes every 10 inches

here already install the metal

No welding around here, just pure rivet welding

all points are already

here the only thing that we will miss in this door is to weld, it's this lock

here I already have in the post, I put a metal and it is

of half an inch

this is the work that goes to do is avoid

that between light or look inside

of the house,

Here I show you the finished door like this it's how we finish

hello friends up here I will get with this video if you would like it

share the installation process let me know in the box

comments and remember if you have not subscribed to the channel I invite you to

subscribe by clicking here on the logo, if you liked it, do not forget to leave your

comment, a like and share it with your friends,

See you in the next video, thanks.

For more infomation >> How to build a fence gate / Como hacer puerta de metal y madera moderna - Duration: 7:12.

-------------------------------------------

[SMB Game Builder] Build a Super Mario Bros Level in 10 Minutes! - Duration: 7:18.

For more infomation >> [SMB Game Builder] Build a Super Mario Bros Level in 10 Minutes! - Duration: 7:18.

-------------------------------------------

France and Germany Plan to Build a Sixth Generation Super Fighter - Duration: 5:00.

For more infomation >> France and Germany Plan to Build a Sixth Generation Super Fighter - Duration: 5:00.

-------------------------------------------

Time Travel: This Physicist Wants to Build a Time Machine | NBC Left Field - Duration: 5:43.

I have something to tell you that you're going to find hard to believe: time

travel is possible and I'm going to tell you how. Einstein's theory is the core of my

work, and Einstein said that time can be altered.

OK, let's pause. Dr. Ron Mallett is a retired research professor of physics at

the University of Connecticut. He is an expert on Einstein's theories. So my work

is based on Einstein's general theory of relativity, how gravity can affect time.

And what I did was I solved Einstein's gravitational field equations for a

circulating beam of laser light. Now, let's rewind. Ron's story doesn't start

here, in the present. His interest in time was sparked at a young age.

Let's take a travel back through time. I was raised in Bronx, New York. This is my

mother Dorothy and my father Boyd Mallett. My father was a television

repairman and I sort of always thought of my father as the television repairman

to the stars. We didn't know that he had a weak heart and he died of a massive

heart attack when he was only 33 years old. It turned my world upside down,

inside out, everything became black, everything became terrible. And about a

year after he died, I came across the book that changed my life, H.G. Wells'

classic The Time Machine. It said that scientific people know very well that

time's a kind of space and we can move forward and backward in time just as we

can move forward and backward in space. I thought, "This is what I need, I could go

back into the past and see him again and maybe save his life." But I knew I was

gonna have to know something about science.

I saw a cover of a book, the second book that changed my life, The Universe and

Dr. Einstein. So I got the book, it was extremely rough going but I did get the

essence. I thought if I could understand when Einstein meant by the ways you

could change time, then that might lead to the scientific possibility of a time

machine. Took me on a very, very long road. Ron knew he had to get an education to

achieve his dream, but he couldn't afford it on his own, so he followed in his

father's footsteps and joined the service. Afterward he was able to use the

GI Bill to go to college. Eventually I did make a breakthrough many years later

in the possibility of time travel. This is my memoir, Time Traveler, that talks

about the journey and how my father's death led to me to develop the means of

time travel based on using light. Ron is not the only scientist studying the

possibility of time travel but he claims all of the research is

based off of Einstein's theories. I solved Einstein's gravitational field

equations, which in a nutshell says that time is affected by gravity. What he

meant by that is that clocks slowed down the stronger gravity is and the equation

that I came up with showed that space actually can be twisted by a circulating

beam of light.

Each one of these levels is a laser square and there's a number of different

levels to increase the amount of twisting that we won't get if we send a

neutron through that's spinning that will actually cause the twisting of the

neutron spin. And in principle you should be able to twist time into a loop. If you

can twist into a loop, you could go from the future back to the past. Everyone has

some interest in time because they all, everyone thinks back to some thing that

happened in their life that they wish they could change again, for example in

my case I wanted to go back in time to see my father again and to try to tell

him what was going to happen and maybe save his life and change what was going

to happen to us, and that's an interest in time travel. And I think that that's

basic and I think it's fundamental. I think that goes back to the beginning of

mankind. I'm not exaggerating about the importance of funding for time travel.

Einstein over 100 years ago predicted ripples in space and it's only

been recently that they were observed and they led to the 2017 Nobel Prize.

That cost 1.1 billion dollars in the space programs. I mean, just to say,

"Well, we want to travel to the moon." That's a statement but in order to

achieve it, it required billions of dollars. People ask me all the time, "When

it's time travel going to happen?" And my answer to them is when we decide that we

want to give it adequate funding. It's not going to be done with a DeLorean in

a garage, it's going to require teamwork, scientific advances, it's gonna require

funding on a large scale. For now, Ron continues his research in time travel

and he hopes that someday, in the not-so-distant future, he'll be able to

complete his lifelong dream and build a working time machine.

Thanks for watching, and if you want to see more Left Field videos, check out our

YouTube channel.

you

For more infomation >> Time Travel: This Physicist Wants to Build a Time Machine | NBC Left Field - Duration: 5:43.

-------------------------------------------

How to Build a Network Marketing Business - Duration: 3:11.

In this video, we're going to talk about how to build a network marketing business.

Hey this is Michelle from Network Marketing Performance where you can find ideas to create

the business and life you love through network marketing.

If you want to know how to build a network marketing business so that you can replace

your income, travel the world and spend more time with your family, well then make sure

you follow these 3 steps in this exact order that we're going to share with you right now.

1.

Gain Knowledge

You need to learn what kind of systems are in place for you to grow your network marketing

business and you need to learn how to do them right.

Learn the basics about your company, the industry and the products and services you have.

You also need to learn what it takes to be successful.

And in network marketing, personal development is a huge part of creating wealth.

So if you want to be successful in network marketing, you need to develop and grow yourself.

Invest in your personal development.

2.

Create a Detailed Strategy

Develop an in-depth plan on how to execute what you've learned so that you can be successful.

You need to prepare for the worst and hope for the best.

Too many network marketers come into this business and just wing it without having a

backup plan when things don't go their way.

They haven't planned any alternatives so they either give up or continue the same thing

over and over without getting any results.

You need to make "if...then" plans.

If something doesn't go as planned, then what are you going to do instead?

So if all your friends and family say no to you about your network marketing business,

what are you going to do next?

If you run out of people in your warm market to talk to, then what are you going to do

next?

What will you do if your online ads aren't generating any leads?

Are you going to continue with paid ads or find other ways to market?

So make sure you put the time into creating a detailed strategy so you always know what

to do next if things don't go as you hoped for.

3.

Take Action

This may sound like common sense but you would be surprised how many people don't do anything

because of their fears or having analysis paralysis.

But that's why you have a detailed strategy plan laid out, to show you the way when the

worst case scenario happens.

Remember, knowledge is only potential power so you need to take action in order to gain

true power.

But don't take action without having a clear and detailed strategy because action without

a plan is just one-dimensional.

Taking action is where mastery lies because you're doing the work and you're learning

how to get better as you go along.

Taking action creates feedback.

Make sure you don't go into it blindly when you learn how to build a network marketing

business.

Be committed to do what it takes to grow your business.

Make sure you first, gain the knowledge that you need to know, then create a detailed strategy

and finally take action.

If you like this video, go ahead and click the like button and share it with your friends.

Make sure to subscribe to our channel to stay up-to-date with new videos from us.

And be sure to check out networkmarketingperformance.com and click on our blog to get more ideas to

create the business and life you love through network marketing.

Thanks so much for watching and we'll see you next time.