Auto news on Youtube Jul 2 2018

In this video, I'll discuss the bar design tips and ideas to build your own

do-it-yourself LED backlit bar -- and how much it costs....coming up!

Hey Rick Uzubell again from Cabaret Design Group, where I share my ideas and

tips on bar design, draft beer system design and product reviews.

Later in this video, I'll give you "Today's Takeaway".

If you're new here, please consider subscribing

and check-out the show notes and links in the "YouTube Description" below.

Now let's jump into the show!

Recognize the concept in this photo?

One of the top questions I'm asked is how to design and build an LED backlit bar.

People are fascinated by commercial lighting, especially when it comes to

backlighting a bar front. Backlit bars create major "WOW-factor" and therefore

the design concepts for doing this are tightly-held -- until now!

The first thing to know about LED backlit bar design is that it can be retrofitted to nearly any

existing bar. The critical design criteria are as follows:

1). Lighting mounting tracks -- as shown in this architectural drawing, the tracks

are mounted continuously along the top and bottom edges of the curtain wall

and provide a simple method of installing the LED lighting.

The KLUS 45-ALU series LED angular extrusion, shown here, is available through SuperBrightLEDS.com.

For those who are creative, a 3/4" x 3/4" PVC strip

will do the same job at a fraction of the cost;

2). The RGB LED strip lighting, as shown here, such as this model by

SuperBrightLEDs.com, the lighting is installed continuously along the top

and bottom edges of the curtain wall; the lighting should contain

30 SMD-type LED's per meter; 3). Lighting controls -- controllers, power supplies and

miscellaneous cables will be necessary and are

available also at SuperBrightLEDs.com;

4). Translucent curtain wall -- as shown here, in section

and here in elevation, this is the main ingredient of the "secret sauce"

that makes the lighting effective. The best value solution are the "Lumi-Onyx"

panels offered by Lumigraf, which consists of Makrolon sheets laminated

with thin layers of translucent film, designed to evenly-disperse the light.

I recommend 3/8" thick panels for all bar fronts;

5). Curtain wall mounting angles --

as shown on this plan, the curtain wall is mounted

to a simple 1/2" x 1/2" x 1/16" anodized aluminum

angle, mounted continuously along its top and bottom edges; mount the angles so

there is 2" of clearance to the inside face of the curtain wall;

6). Mounting tape -- shown here in section, hands-down, the best solution for

installing the curtain wall to the mounting angles is to use 3M VHB 4950

double-faced tape, 1/2" wide; the best place to buy this tape is at ULine.com,

and 7). Caulk -- apply clear silicon caulk to all vertical

butt joints, as shown in this elevation.

Lastly, the curtain wall should sit about

7" above the finished floor; for bars with solid foot rests, simply

install the bottom mounting angle to the top of the footrest; for bars without a

solid footrest -- such as this one, install a 7" x 2" toe kick before proceeding.

So how much does it cost to build an LED backlit bar? Here's a cost

summary of all the above hardware necessary to build your own backlit bar.

The best RGB LED lighting for backlighting bars is a 5050 waterproof strip,

with 30 SMD LED's per meter, rated at 900 lumens and 7.2 watts.

See you next time!