Auto news on Youtube Dec 25 2017

Hello! Welcome back to the Natural Stone Outlet.

On today's video, we are going to

talk to you about Travertine Classic

from Turkey and the main finishings.

There are finishings for interior, there are

finishings for exterior. We are going to

talk about the most relevant ones.

Up here, what we have are finishings

normally used on interior applications.

Although, some of them could be used on

exterior, they're mostly used on interior

applications. Here, we have a polished

finishing, which highlights the elements

of the stone.

The filling is made with resin,

transparent resin, so this is what you

get. Quite some contrast, quite some shine.

This one is honed, but it's also filled

with resin, transparent resin. It´s a bit

more matt, not as beige as this one.

But quite good also for

interior flooring, wall-coverings or even

exterior cladding. Here, we have mastic

filled Travertine, honed surface.

You can see the colour, the beige colour of the stone,

but it's matt, there is not so much shine.

This one is also mastic filled, but polished.

Essentially, you get the same as the honed,

you can hardly notice the difference, but

it's a bit shiny, so that's essentially

the difference. On this side, it's

unfilled and it's brushed, so it's a vein-cut

Travertine brushed. Again, you get the

same colour as the other ones, but a certain

rugosity you know.

Which is interesting, is a good anti-slippery

type of finishing. This could be used

on wall-coverings, or just flooring.

Then, we go to the bottom part, where we

have some interesting finishings.

This one is unfilled and it's polished, so

this is not the best fishing for

exterior, but we have it here anyway.

This would be mostly used on the wall

coverings. This one is unfilled and it´s

honed. It´s a little bit lighter than

the polished one. You can see that the polished

one is a bit more orange, has a bit more

power, more beige. This one is a bit more pale,

great choice for wall cladding or

just decoration in general.

This one is brushed and filled, it's interesting

because by brushing the stone, you get a

bit of the colour back. So quite

interesting, you see a lot of rugosity.

This is mostly used on pool borders,

where you would like to walk

bare-feet,

without you know hurting your feet.

So, this is quite good anti-slippery, good

for exterior applications. Down here, we

have the sandblasted and brushed, so you

sandblasted the stone and then brush it.

By sandblasting, you get this kind of

look, which his white, and then by brushing

it, you get back the colour. So becomes

a bit brownish, not so much beige, more

brownish. This is the sandblasted, so you

just sandblast the stone and you get a white surface.

Good anti-slippery, great for exterior

applications.

And finally, we have the sawn-cut

finishing, which by itself is a type of

finishing. So you just sawn-cut the slabs, the

block and this is what you get from the

slabs. So, pretty raw, pretty rough, with good anti

slippery, but showing a light beige colour.

That´s it, you have seen quite a lot

of different finishings, both filled and

unfilled, for the Classic Travertine, or

Beige Travertine vein-cut. If you need to

know more information, check your blog or

just be in contact with us.

Thank you for watching.

For more infomation >> Travertine Classic from Turkey - Vein Cut Finishings - Duration: 4:07.

-------------------------------------------

How to replace Fitbit Ionic bands (Classic/Milanese) - Duration: 4:43.

hello everyone welcome to this video on how to change the fitbit ionic wristbands I have

here my fitbit ionic the charcoal smoke grey color with the default classic wristband the

blue grey if you turn it upside down you can see here that this is the large size as it

says here L/G so this is the large size wristband and if you want to see it on my wrist just

put it on like this and I like it tight so I can put it on the fourth or the fifth hole

in here and it just snap it in and this is how it looks on my wrist it looks pretty cool

my wrist is not that big so I think it's really well now if you want to replace this default

wristband all you have to do is to take off this wristband using these buttons just use

your finger nails like this and it comes off don't try to force it off the watch just gently

press the button and it will come off now I have bought the milanese wristband which

looks pretty cool as well light and as you can see it's quite flexible as well so you

can get this one from eBay or from Amazon for as little as 18 bucks or something so

in order to put it on all you have to do is just flip it on the side where the buttons are

as you can see here and the magnetic part will be pointing to the top and just snap it in like this

and the other side just like that pretty straight forward now if you want to try it on just

put it in like that and the metal part make sure it fits your wrist again I like tight so just put it like that and it looks pretty

cool now if I want to put back the classic wristband all I have to do is again take this

one off the watch same way gently press that button and it will come off on the other side

press the button again easy and it comes off now let's put on the classic wristband again

the one with the clasp will point to the top like that make sure it is snapped in properly and the

other one like that make sure it's snapped in and there you go that's it and thanks for watching